Description
Antique Polish Abrasive Brushes : any type stone can have this type finish applied, the brushes picks the soft grains and rolls over the harder grains. This is a textured finish that is very easy to produce with automatic or manual machines. This finish is also called Leather, River wash.
Starting from a saw cut or polished surface:
Begin with the metal diamond abrasive, make sure to remove all cutting marks, if any cut marks / drags were left on the stone, you will be able to see them in the finish. Then follow with the diamond wire brush.
- Stone that has large & small grain will do better than tight grain. * * Tight grain needs to be flamed 1st like (Absolute black)
- For Granites and hard type stones – The Diamond wire brush will speed the process; these are very aggressive brushes. Diamond wire brushes are availableall 3 types are not required in a sequence, it’s all depending the stones hardness and to the effect desired in the end finish. But in most cases with the Diamond wire brushes on granite, the more cycles, the deeper the texture.
Antique Polish Abrasive Brushes Are Available Grit Nos Are
- #36
- #120
- #240
- #500
Reviews
There are no reviews yet.